for use on mobile tanks and trucks, barrels, IBC, FIBC.
Electrostatic charges can build up as a result of the friction when flammable liquids, gases or solids are being conveyed. The resulting electrostatic discharges e.g. sparks can be a risky ignition source for explosive atmospheres under the appropriate conditions. The FARADO® II continuously dissipates the electrostatic potentials to prevent these discharges. The FARADO® II also monitors the resistance/capacity of the connected object as well as the connection‘s resistance. No acti- vation will be given if they do not exceed the preset limit values. Insufficient resistance/capacity means that the grounding clamp is not connected to the specific object, but is possibly connected to a smaller or already grounded object. This process ensures tamper-proof use of the grounding system.
The self-monitoring FARADO® II grounding system was developed for grounding when filling or emptying mobile containers such as tank trucks, IBCs, FIBCs, drums, etc., and it is used in the chemical, food, pharmaceutical, cosmetics, oil and gas as well as wood industries.
Grounding reel CR-1
with grounding clamp SRC-2, 10m lenght, cable locking device and eddy current brake
Easy on-site installation thanks to its compact design.
The connected objects capacitance check ensures that the system is tamper-proof.
Approved for use in hazardous areas zones 1 and 21.
Integrated signalling for reliable monitoring.
Settings can be adjusted via an RFID chip.
Remote maintenance and setting up options via a PC.
When the FARADO® II detects the grounded tank, the pumps, valves or mechanical conveyors connected to the grounding relay will be activated for the filling process. The connection between the clamp and the object is permanently monitored. If a fault occurs or if the clamp’s connection becomes disconnected, then the grounding relay will generate a corresponding signal and the filling process will be stopped.
-40°C up to +65°C
-40°C up to +55°C
Filling and emptying containers
Dimensions (W x H x D)
200 x 220 x 60 mm
AC Version: 115/230 V~ (-15 ÷ +10%) 50 - 60 Hz, DC Version: 10 ÷ 30 VDC
Potential-free contact, RS485
II 2 (1) GD, Ex db [ia Ga] IIB T6 Gb, Ex tb [ia Da] IIIC T85°C Db
If an RS485 interface (ModBus protocol) is used, the data from previous grounding processes can be sent out and checked in order to identify incorrect system operation and to eliminate it through optimisation measures. Product-specific software is included in the package for this purpose.
Your contact person
I will be happy to advise you about the most suitable Protection systems for your plant. Individually, in detail and taking all relevant parameters into account.
Alexander Kemmling | Sales Executive Explosion Prevention